Heating System
Please refer to the information supplied by the manufacturer regarding maintenance.
Although all heating systems are balanced prior to occupancy, it is the homeowner’s responsibility to adjust the heating system to suit individual preferences. To balance heat, you should adjust the dampers in the registers. This will regulate heat flow to individual rooms. If you require advice on balancing your system, contact our Service Department.
If the heating system is operating during construction the ductwork will be professionally cleaned prior to the home’s closing date.
The following is a list of things to check for if your furnace stops working.
- Make sure that the furnace switch is turned on.
- Ensure the furnace filter is clean and free from obstruction.
- Turn the furnace switch off for 60 seconds and then turn it on again (to reset the computer board in the furnace)
- Ensure that the breaker in the electrical panel is in the on position.
- Check the thermostat to ensure that it is set at a normal temperature.
- Check the exterior exhaust pipe and intake are clear from any snow, ice, or any other blockage.
If the above steps do not resolve the problem, please call our customer care team.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article